Pump power alone does not indicate system performance. Desired flow rate; It is determined by the pool volume and usage, and then evaluated together with the resistance created by the filter, pipes, valves and auxiliary equipment.
Actual operating point
The pump curve and the system curve of the installation are examined together. Filter contamination and different valve positions can change the operating point; The selection must meet this range.
Surface area of the filter
The filter type and surface speed are selected based on the targeted water quality and producer conditions. The need for backwashing, drainage capacity and technical volume are also checked.
rev control
Working program for variable speed pump; Must maintain minimum equipment flow rates and required purification. Lower speed does not mean adequate cleaning under all conditions.
frequently asked question
Would enlarging the existing pump solve the problem?
If there is narrow pipe, air leak, clogged filter, or incorrect valve position, a larger pump may aggravate the problem. First, the existing system is measured and the bottleneck is identified.